Luminaire edges cut out to fit Save-It-Easy® T5 adaptors

into older style T8 fittings - other customers with similar fittings found bending the luminaire edges also worked well. Each luminaire fitted with 2x36W T8 lamps & upgraded to 2x28W T5 lamps - energy saving achieved >30%

Alternating luminaire sides

de-lamped. This delamping method is especially effective where luminaires are closely positioned together. Each luminaire fitted with 2x58Watt T12 lamps & upgraded to 1x35W T5 lamp - energy saving achieved >60%.

T5 lamps & Save-It-Easy®

T5 retrofit adaptors installed into old luminaires with diffusers fitted - this picture taken after de-lamping had been completed by the hospital. Each luminaire fitted with 2x36W T8 lamps & upgraded to 1x28W T5 lamps - energy saving achieved >50%

A good example of delamping where every second luminaire in a hallway has both lamps removed i.e. 100% de-lamping. Hospital staff determined that light levels were well within the Australian Standard even with every second luminaire 

de-lamped. Energy savings achieved >50%

Office areas were similarly

de-lamped  with each luminaire fitted with 2x36W T8 lamps & upgraded to 1x28W T5 lamps - energy saving achieved >50%

No de-lamping for main Reception area - full lighting levels maintained and energy saving achieved >30%

Terry Kanellos representing Ilum-a-lite presents Ms Liz Haywood Project Engineer Bendigo Health with a hamper for the Hospital's Christmas Appeal.

Engineering Department's tent for the Hospital's Christmas Appeal...outside view.

Engineering Department's tent for the Hospital's Christmas Appeal...inside view 1.

Engineering Department's tent for the Hospital's Christmas Appeal...inside view 2.